Broad Working Temperature Range – PFA's extensive service temperature range of -328 °F (‑200 °C) to 500 °F (260 °C) gives it one of the widest application windows of any fluoropolymer plastic.
This PFA tubing is widely used in the semiconductor, laboratory, environmental and pharmaceutical industries where ultrapure chemicals (including water) require precise quality control. ... fluctuations in temperature, abrasion, high purity and long service life. Shop Now. Cart; Home Tubing, Hose & Fittings Versilon™ Tubing Versilon™ PFA ...
Fluoroline ® PFA tubing and pipe pressure ratings were established using ASTM D2837. This test exposes the tubing or pipe to long-term, constant pressures at various temperature settings. Our test took 22 months to complete.
It delivers higher polymer purity and continuous service temperature when compared with other fluoropolymer tubes. It is excellent for use for more critical, low pressure applications. ... PFA Tubing High Purity 1/4" OD x .188" ID 50ft Buy Now.
While slightly more expensive, PFA tubing carries a number of improvements over other types of fluoropolymer tubing. The modifier used in PFA resins results in the same maximum use temperature and chemical inertness as PTFE (500 F).
Teflon tubing is flexible and resistant to crimping and blockage. This is the preferred tubing for emissions measurement below 500F. ... ** Teflon ® PTFE Tubing Bend radius is for room temperature bends. Heating tube to soft point prior to bending is best for permanent bends. ... 1/4" and 3/8" Teflon ...
Apex offers both Straight and Elbow PFA Fittings with male 1/4" NPT for 1/4", 3/8" and 1/2" tubing. PFA (Perfluoro-alkoxy) fittings are chemically inert and highly corrosive resistant. Higher mechanical strength than PTFE at elevated temperatures (to 500 ºF).
PFA has high thermal stability Meets SEMI F57-0301 specifications Flammability: UL 94 rated V-O (self-extinguishing) Pressure-Temperature Ratings Fractional Tubing Ultrahigh-Purity PFA Tubing PFA4 and PFA9D Tubing Size, in. 1/8 1/4 3/8 1/2 3/4 1 1 1/4 Temperature °F (°C) Working Pressure psig (bar) 75 (23) 300 (20.6) 275 (18.9) 235 (16.1)
PFA Tubing (Perfluoroalkoxy) offers excellent crack and stress resistance and is used when more demanding mechanical characteristics are required. PFA Tubing is the product of choice for applications involving extreme chemical resistance combined with high temperature exposure.
This PFA Compression 90° Tube Elbow from Parker Hannifin has a 1/4 in port 1 tube size and a 1/8 pipe size on port 2. It also has a NPT port 2 connection type and a male connection on port 2. It has a 225 psi maximum operating pressure and a 32° F minimum operating temperature.
Teflon Pfa Transparent Tube 1/4'', Find Complete Details about Teflon Pfa Transparent Tube 1/4'',Pfa 1/4'' Tube,Pfa Od6.35*id3.95mm Tube,Pfa Tubes from Plastic Tubes Supplier or Manufacturer-Wuxi Susui Fluorine Plastic Products Co., Ltd.
Table 2 Summary of Properties of DuPont PFA Film Typical Value* Property Test Method SI Units English Units Tensile Strength at Break ASTM D-882 21 N/mm2 3000 psi …
Teflon Tubing found in: Scienceware® Small Bore Teflon® TFE Tubing, Teflon FEP Thin Wall Tubing, Puradisc™ 13 Syringe Filters, Teflon® 890 FEP Tubing,.. ... The barbed fitting end accepts 6.4 to 9.5mm (1/4 to 3/8") ... Inlet and outlet tubes take 1/8" tubing. The temperature rise in sample compartments is much less than encountered in ...
With a temperature range of approximately -330°F to 500°F, it offers the widest temperature range of the fluoropolymers. In addition, it has excellent electrical properties and low permeability. PTFE tubing is most widely used as laboratory tubing and for applications where chemical resistance and purity are essential. PTFE has a very low ...
Teflon PTFE Tubing : Fractional The first and most common of the Fluoropolymers is PTFE ( Polytertafluoroethylene ) . PTFE Tubing has the widest range of applications thanks to its high service temperature, superior chemical resistance and insulating properties .
Buy Cole-Parmer PFA (Perfluoroalkoxy) Tubing, 1/4 x 3/8", 25 Ft and more from our comprehensive selection of Cole-Parmer PFA Tubing
PFA is a fully fluorinated plastic. The tubes have excellent chemical resistance and an extremely high weather- and UV stability. They also maintain their mechanical properties at high temperatures.
PFA Tubing Properties: PFA is a balance between PTFE and FEP pipes. It bears temperature up to 260°C with tubes in high transparancy. With such properties, PFA flexiable tube are designed for fluid handling and cabling systems.
Fluoropolymer Tubing is widely used in high temperature and chemical resistant applications for industries such as semiconductor, automotive, chemical, petrochemical and pharmaceutical. ... Testing has proven that a high purity PFA tube is able to withstand corrosive surfactants for longer periods of time than standard fluoropolymer tubing.
1 1/4" Reduced Footprint Flaretek ® Tube Flare and Assembly Procedures ... Proper tube flaring and Flaretek ® fitting assembly results in a secure tubing connection. Entegris recommends these procedures for flaring standard wall Entegris 1 1/4" PFA tubing only (.075" wall thickness).
Teflon PFA tubing,PFA tubing. anticorrosive high-low temperature resistance 1/4'pfa tube. Introduction: PFA tube is made from PFA resin and prepared by the technology of thermoplastic extrusion and blowing. It has non-sticking, heat-resistance, aging resistance, corrosive resistance, non-flammability and good electric property. It can be solid
For an all-around amazing fluoropolymer tube, contact Fluorotherm today. An ISO 9001-2015 Certified Company. Products. ... Use temperature of 500 F (~260 C) equal to PTFE and 50 F higher than FEP ... *Manufactured in the USA by renowned fluoropolymer manufacturer Fluorotherm™, PFA tubing comes in orange and clear colors, and is USP Class VI ...
If your temperature requirements range up to 500º F (260º C), PTFE Tubing (PolyTetraFluoroEthylene) is the recommended choice. It resists "melt-off" by soldering irons when making terminations.
Size Tube size OD Wall thickness Tube size ID Minimum bend radius Maximum roll length ... FluoroLine Ultrapure PFA tubing 1/4" 24°C (75°F) 1882 kPa (273 psig) 93°C (200°F) 938 kPa (136 psig) ... Size Temperature FluoroLine Ultrapure PFA tubing 3/4" 24°C (75°F) 738 kPa (107 psig)
Proper tube flaring and Flaretek ® fitting assembly results in a secure tubing connection. • Entegris recommends these procedures for flaring standard wall Entegris PFA tubing only (.062" wall thickness for 3/8", 1/2", 3/4" and 1" O.D., .047" wall thickness for 1/4").
Expanded PTFE 4:1 Heat Shrinkable Tubing . How to Shrink . The most reliable heat shrinking method for PTFE 4:1 Heat Shrink Tubing is in a controlled oven at 662°F/350°C for approximately 10 minutes. PTFE heat shrink is recommended for aircraft harnesses, catheters and temperature sensors. ... 1/4.187.250: 4.77 6.35.050.063: 1.27 1.60.012 ...
Perfluoroalkoxy alkane polymers are used to fabricate tube to handle aggressive chemicals. Perfluoroalkoxy alkanes ( PFA ) are fluoropolymers . They are copolymers of tetrafluoroethylene (C 2 F 4 ) and perfluoroethers (C 2 F 3 OR f, where R f is a perfluorinated group such as trifluoromethyl (CF 3 )).
Teflon ® PTFE Tubing continuous lenghts of 250 ft are now available in 1/8", 1/4" and 3/8" Teflon ® PTFE Tubing. For specific properties, see our Teflon ® PTFE Tubing Summary of Properties . For burst pressure values, see our Teflon ® Tubing Theoretical Burst Pressure Chart .
Flexible Tube Fittings; All Tube Fittings; Compression Tube Fittings ... fluctuations in temperature, abrasion, high purity and long ... Home Tubing, Hose & Fittings Versilon™ Tubing Versilon™ PFA Tubing 5/32" ID x 1/4" OD x 3/64" Wall Versilon™ PFA Tubing. Product Video. 5/32" ID x 1/4" OD x 3/64" Wall Versilon™ PFA Tubing. Item ...
CH - Temptrace™ electric heat trace tubing is intended for high temperature maintenance up to 400°F (204°C) in applications that involve analyzer, impulse and instrument lines, small diameter process lines, stack gas sampling lines and utility lines.